Activate an existing geometry
You can activate previously generated geometries, for example if your work with the Component fitting application has been interrupted. After activating a geometry, the geometry components are displayed again in the Component fitting main window and can be modified.
Only one geometry, horizontal or vertical, can be active at a time. Use the View / Horizontal components or View / Vertical components commands in order to activate the other geometry for modification.
To continue the work on previously generated geometries:
1. Select the filtered survey vector in the CAD file by using the CAD Selection tool.
2. Select Activate geometry command from the Horizontal pulldown menu in order to activate a horizontal geometry.
OR
3. Select Activate geometry command from the Vertical pulldown menu in order to activate a vertical geometry.
4. Identify the geometry components drawn in the CAD file with a data click inside a view.
This lists the geometry components in the Component fitting main window. You can continue with modifications of the components as described in Sections Modifying the horizontal geometry and Modifying the vertical geometry. If the vertical geometry is associated with a horizontal geometry, the horizontal geometry should still be present in the CAD file and is automatically available for activation.