Vectorize Buildings

<< Click to Display Table of Contents >>

Navigation:  TerraScan User Guide > Tool Reference > TerraScan Toolbox > 3D Building Models > Buildings toolbox >

Vectorize Buildings

Vectorize Buildings

Not Lite, Not Spatix

b_vectorize_buildingsVectorize Buildings tool creates 3D building models based on loaded point cloud data. The point cloud has to be classified into:

ground points using the Ground classification routine.

above-ground points which may be hits on building roofs using Compute distance followed by the By distance classification routine. This classification also includes points from high vegetation and other high objects.

points on building roofs using the Buildings classification routine.

The tool creates MicroStation cell elements that contain shapes for each roof plane, possibly roof sides which determine the roof’s thickness according to settings in Building vectorization / Model, and wall shapes for each outer roof edge.

Building vectorization can be also performed on project level by using the Vectorize buildings macro action.

To vectorize buildings based on loaded points:

1. Load point cloud data into TerraScan.

2. Select the Vectorize Buildings tool.

This opens the Vectorize Buildings dialog:

vectorize_buildings

3. Define settings and click OK.

This starts the vectorization process. It may take a while until the first models are created because the routine creates models for large buildings first. The building models are drawn into the CAD file according to the settings in Building vectorization / Levels category of TerraScan Settings.

SETTING

EFFECT

Roof class

Point class consisting points on building roofs.

User roof class

Point class consisting points on building roof details. The details are vectorized even if the area is smaller than the Minimum detail value.

Lower classes

Point class(es) consisting points next to building roof edges, for example, ground or low vegetation. The points are used to determine the base elevation of building walls and help to place outer roof edges more accurately.

_select_classes

Opens the Select classes dialog which contains the list of active classes in TerraScan. You can select multiple source classes from the list that are then used in the Lower classes field.

Process

Area to be processed:

All points - all loaded points are processed. This may include points from neighbour blocks.

Active block - points of the active block are processed.

Inside fence - points inside a fence or selected polygon are processed. This is only active if a MicroStation fence is drawn or a polygon is selected.

Use polygons

Defines how polygons are used in addition to point cloud data:

Do not use - no polygons are used.

As bounding polygons - polygons define boundaries that divide large building blocks into separate models. Example: land property polygons.

As roof edges - polygons define the XY shape of outer edges of buildings. Example: footprint polygons.

Level

CAD file level on which the polygons are located that are used in the vectorization process. This is only active if Use polygons is set to As bounding polygons or As roof edges.

Maximum gap

Maximum distance between building parts belonging to the same model. If the distance is larger, separate building models are created.

Planarity tolerance

Defines how closely a point must match a plane equation to belong to that roof plane.

Increase tolerance

Additional tolerance for merging close to horizontal planes together.

Minimum area

Minimum size of a building footprint.

Minimum detail

Minimum size of a building part footprint.

Max roof slope

Maximum gradient of a roof plane.

Adjust edges using active images

If on, building edges are adjusted based on images. The images must be referenced by an image list loaded into TerraPhoto.

Random wall color

If on, wall shapes are colored randomly by using a selection of colors from the active color table of the CAD file.

If off, the color defined in Building vectorization / Model category of TerraScan Settings is used for all wall shapes.