Mark Elements By Centerline
Mark Elements By Centerline tool can be used for detecting linear elements close enough or closest to selected centerline elements. Detected elements are moved to another CAD file layer.
To mark elements close to a centerline:
1. Select the centerline element(s).
2. Select the Mark Elements By Centerline tool.
The Mark Elements By Centerline dialog opens:
3. Select settings.
4. Confirm the process with a data click inside a CAD view.
This detects the elements that fulfill the conditions and moves or copies them to the given CAD file layer.
SETTING |
EFFECT |
---|---|
Mode |
Action performed for detected elements: •Move to another level - elements are moved to the given target level. The original elements are removed. •Copy to another level - elements are copied to the given target level. The original elements are kept. |
From level |
Source level on which the elements are drawn. |
To level |
Target level to which the detected elements are moved or copied. |
Mark elements |
Determines which elements are marked: •All - all elements that fulfill the conditions. •Closest - •Closest two - |
Left offset |
Distance to the left of the centerline element within which elements are detected. |
Right offset |
Distance to the right of the centerline element within which elements are detected. |
Step |
Distance interval along the centerline element at which the software checks for elements to detect. |