Edit

<< Click to Display Table of Contents >>

Navigation:  TerraPhoto User Guide > Tool Reference > Main Window Menu Commands > Images pulldown menu >

Edit

Edit

Edit command lets you modify the information of one or several images in the active image list.

If information is changed for several images, the values for image position coordinates, orientation angles, and time are no longer absolute values but difference values. These difference values are then added to the original values of the selected images.

To modify information of a single image:

1. Select one image in the image list.

2. Select Edit command from the Images pulldown menu.

This opens the Image information dialog.

3. Modify settings and click OK. See Add command for more information.

This modifies the values for the selected image.

4. Select Save list or Save list As commands from the Images pulldown menu in order to save the changes into an image list file.

To modify information of multiple images:

1. Select multiple images in the image list.

2. Select Edit command from the Images pulldown menu.

This opens the Edit several images dialog:

edit_several_images

3. Check the toggle buttons for the parameters to modify.

4. Define values and click OK.

This applies the modified values to the selected images.

5. Select Save list or Save list As commands from the Images pulldown menu in order to save the changes into an image list file.