Add

<< Click to Display Table of Contents >>

Navigation:  TerraPhoto User Guide > Tool Reference > Main Window Menu Commands > Images pulldown menu >

Add

Add

Add command lets you add an image to the active image list. You define manually the image file name, xyz position, heading, roll, pitch angles, and (optional) other image parameters.

To add an image to the list:

1. Select Add command from the Images pulldown menu.

This opens the Image information dialog:

image_information'

2. Define settings and click OK.

This adds a new image to the image list.

3. Select Save list or Save list As commands from the Images pulldown menu in order to save the changes into an image list file.

SETTING

EFFECT

File name

Name of the raw image file.

Time stamp

(Optional) Time stamp of the image.

Camera

Name of the camera which captured the image.

Rectify

Defines whether the image is used in orthorectification processes or not. An image with rectification status Yes is considered an active image, otherwise images are considered as inactive.

Tie status

Defines the status of the image for tie point work:

Check - the image is included in the list of images for placing tie points.

Approved - the image is excluded from the list of images for placing tie points.

Quality

(Optional) Quality value of the image.

Group

(Optional) Group number of the image.

Line

(Optional) Line number of the image.

Easting

Easting coordinate of the image position (focal point).

Northing

Northing coordinate of the image position (focal point).

Elevation

Elevation coordinate of the image position (focal point).

Heading

Heading angle of the image orientation. Given in degree.

Roll

Roll angle of the image orientation. Given in degree.

Pitch

Pitch angle of the image orientation. Given in degree.

Accuracy

(Optional) Accuracy estimate of the image XYZ positioning. This may be derived from trajectory position accuracy values.

See also the description of the image list format for more information about attributes of each image.